Schmidt｜Snow plough｜Tarron
- A powerful 25° snow plough blade with an excellent damping override system using a shock absorber mount with over-expansion stop and optional stabilising springs.
- Efficient and reliable clearance of any remaining snow by means of a hydraulic fine-finish blade.
- Raised share for extra high and wide snow ejection.
Plough blade
Particularly high and wide snow removal is achieved by the flow-optimised, rounded blade shape, operating at a 25° angle and being raised on the right. The outside blades are tensioned with an extra spring for increased pressure. Each blade segment is equipped with four rigid links for optimal guiding. The torsion-resistant links are made of polyethelene. This helps reduce noise and vibration, as do the polymer blade stops on each blade segment.
Override security system
In conjunction with the shock absorber mount, the blade sections can deflect around obstacles to prevent damage. After each obstacle, a powerful blade retaining spring returns the sections back to the clearing position. A shock absorber mount between the cutting edge and the plough absorbs all the tractive forces.
Cutting edges
Steel cutting edge (S)
A multi-purpose, cost optimised solution for aggressive clearing of hard and/or compact snow. Steel cutting edges are resistant to bending and twisting, giving a clean result.
Combi cutting edge (size 36 and 50) (C36 / C50)
A more durable cutting edge made of steel, rubber and ceramic. This cutting edge is meant for aggressive snow clearing and can be a good alternative if the steel cutting edge is wearing out too fast. The combination of materials ensures noise and vibration reduction.
TUCA SX cutting edge
A state-of-the-art, high performance cutting edge designed for long- term use. The patented Küper Wave Technology uses a curved profile to remove snow without resistance. Separate tungsten holders embedded in rubber and vulcanized between front and rear Hardox 400 steel plate make the TUCA SX incredibly durable.
Rubber cutting edge (R)
A good solution for use on innercity roads and speciality properties like parking lots. Due to the flexible and elastic characteristics of rubber, it glides smoothly over the surface. A rubber cutting edge is especially efficient when clearing snow slush.
GK 5 cutting edge (GK 7)
A GK cutting edge allows for more efficient snow slush clearing with longer service life and less friction. This cutting edge is made of steel, rubber and corundum and is therefore more aggressive than a rubber cutting edge.
Lifting device
The three-point lift with automatic transverse tilt compensation enables the plough to be raised and lowered accurately and straight. A swing device moves the plough automatically between working and transport positions. The hydraulic lift and swivel cylinders of the lifting system are made of stainless steel piston rod for improved resistance.
Hydraulic angling system
Lateral adjustment is actuated by two powerful double-action swivel cylinders that position the Tarron in the selected clearing position without backlash.
Working support devices
Castor wheels
The infinitely height-adjustable castor wheels with optional splash guards ensure precise adjustment of the snow plough and provide appropriate aggressiveness during snow clearing. They support the frame when driving over obstacles and extend the service life of the cutting edge.
Sliding shoes
Alternatively, maintenance-free height-adjustable sliding shoes can be fitted. They are made of highly wear-resista