Aebi｜Slope tractor｜TT 241⁺ / TT 281⁺

Stepless travel drive: The travel speed is controlled steplessly and optionally via the travel lever or the foot pedal. The hydrostatic travel drive creates a permanent frictional connection between the engine and wheels and allows the vehicle to maneuver safely and precisely - even on extreme slopes.

Terrain adaptation: The front axle can twist in relation to the rear axle. This twisting enables precise adaptation of the attachments to the terrain.

Balanced weight distribution: Both Terratrac models distribute their weight evenly over all wheels. This increases slope capability, protects the soil and reduces tire wear.

Four steering modes: At the push of a button, you can switch between front (a), rear (b), all-wheel (c) and crab steering (d) while driving. From a driving speed of 15 mph, the Terratrac automatically switches to front steering.

Torsen / T-Traction: The Torsen longitudinal differential provides a permanently acting compensation of the drive torque to all four wheels. This protects the drive components and wheels, as well as the ground and turf.

Automatic Drive Control (ADC): ADC automatically controls the maximum feed rate of the attachment. The engine thus always rotates in the optimum speed range to save fuel.

ECO-Drive: The engine speed is reduced while the speed remains unchanged. This results in lower fuel consumption and the noise level is reduced.

TipTronic: The range of movement of the travel lever proportionally maps the travel speed range. The maximum speed can also be restricted via Tiptronic, but without limiting the range of movement of the travel lever. This enables extremely precise and sensitive speed control.

Travel programs: The four travel programs allow precise adjustment of the speed to the attachment.

• Road travel: 100% of the engine power acts on the travel drive. Full tractive force already at 1 300 1/min.
• Mowing: 30-70% of the engine power is applied to the traction drive. Full tractive force from 1 400 1/min.
• Snow blowers: 10-20% of engine power is applied to travel drive. Full tractive force from 2 000 1/min.
• Proportional: 30-70% of the engine power is applied to the traction drive. Automotive or proportional drive is selected simply by pressing a button.

Front and rear linkage: The standard hydraulic output of the model series of 10.6 gal/min can be extended to 14.5 gal/min as an option. The powerful linkages enable the simultaneous operation of a wide range of attachments. The category I & II front linkage has a lifting capacity of 4,409 lb and a standard side shift of 630 mm. The rear linkage corresponds to category II with a lifting capacity of 3,968 lb. When coupling or uncoupling the attachments, the "Lift" and "Lower" linkage functions inside the cabin or a freely selectable control unit for the operation outside the cabin can be used.

Relief hydraulics: The relief hydraulics allow the attachment to glide over the ground with freely adjustable contact pressure. Together with the laterally oscillating implement suspension, this results in precise adaptation to the course of the terrain and guarantees clean work results.

Vibration absorption: The Terratrac's front hydraulics and optional rear hydraulics compensate for vibrations from the attached implements and absorb shocks. This enables faster shifting, improves driving safety, increases driving comfort and protects the machine.

Automated work sequences: The linkage function combines recurring work steps in an automated sequence. As an example, when mowing, after raising the front mower (a) for the turn, the machine can automatically engage four-wheel steering and raise the rear conditioner (b). If the operator lowers the front linkage again, (c) the front steering activates again and the rear implement lowers (d). The linkages are freely programmable, either simultaneously or with a delay, and save a lot of time during maneuvering.

Cockpit: The modern cockpit impresses with plenty of space and an ergonomic arrangement of the controls. Holders for the cell phone and a drinking bottle up to 0.4 gal are within reach for the driver. For even more comfort in the panoramic cabin, heating, dust filter and air conditioning are optionally available.

Operating concept: The display instrument with color display always informs the driver about all important data. With the multifunctional travel lever, the direction of travel can be changed without stopping and all implements can be controlled quickly and precisely with just one finger. The intuitive operating concept of Aebi vehicles is used across all products and remains the most innovative system on the market.

Comfort seat and swivel device: For even greater driving comfort, the seat can be supplemented with an air suspension system that absorbs strong shocks. The optional swiveling device allows the driver to sit upright in steep shift line drives.

Cooling system & reversible fan: The fan intensity of the cooling system is regulated based on demand. The large-sized cooler is easily accessible and can be easily folded up for cleaning. The optionally available reversible fan automatically changes the direction of rotation at intervals during operation.