Monroe ｜Snow plough｜One-way

One-way-Style Plow

The One-way-Style plow is designed for use in both rural and metropolitan areas. Its One-way moldboard profile lifts and curls snow for easier discharge, helping reduce fuel consumption while maintaining efficient plowing performance.

Trip and Moldboard Options

Trip Options

Multiple trip systems and moldboard options are available for the One-way-Style to protect both the plow and the vehicle while meeting different operational needs.

The full trip option allows the entire moldboard to tilt forward when encountering an obstacle
The trip edge design permits only the cutting-edge sections to fold back
For maximum adaptability, the dual trip combines both approaches, ensuring smooth operation across challenging surfaces

Full Trip

Moldboard Options

10GA GR50 Steel
3/16“ GR50 Steel

Moldboard overhang at center attack angle

(A = Moldboard Intake Height | B = Moldboard Discharge Height | C = Moldboard Overhang)

10‘ Models: A 30“ | B 47“ | C 20.2“
11‘ Models: A 30“ | B 47“ | C 20.2“
10‘ Models: A 39“ | B 52“ | C 28.5“
11‘ Models: A 39“ | B 52“ | C 29.0“
12‘ Models: A 39“ | B 52“ | C 29.0“
11‘ Models: A 30“ | B 60“ | C 25.4“
12‘ Models: A 30“ | B 60“ | C 25.4“
10‘ Models: A 33“ | B 50“ | C 19.6“
11‘ Models: A 33“ | B 50“ | C 19.6“
12‘ Models: A 33“ | B 50“ | C 20.0“
10‘ Models: A 42“ | B 55“ | C 27.5“
11‘ Models: A 42“ | B 55“ | C 27.9“
12‘ Models: A 42“ | B 55“ | C 28.4“
11‘ Models: A 33“ | B 63“ | C 24.8“
12‘ Models: A 33“ | B 63“ | C 24.6“

One-way Deep C-Style Plow

The One-way Deep C-Style plow is designed for rural applications and efficiently handles large snow volumes. Its Deep C-Style moldboard profile improves snow discharge while helping prevent snow from blowing over the top of the plow onto the truck‘s windshield.

Trip and Moldboard Options

Trip Options

The One-way Deep C-Style offers the full-trip option to protect both the plow and the vehicle while meeting different operational needs. The full-trip option allows the entire moldboard to tilt forward when encountering an obstacle

Moldboard Options

10GA GR50 Steel
3/16“ GR50 Steel

Moldboard overhang at center attack angle

(A = Moldboard Intake Height | B = Moldboard Discharge Height | C = Moldboard Overhang)

11‘ Models: A 26“ | B 57“ | C 22.7“
12‘ Models: A 26“ | B 57“ | C 23.5“
11‘ Models: A 29“ | B 60“ | C 35.7“

One-way High Speed (HS) -Style Plow

The One-way High Speed-Style plow is designed for long runs of open rural highways designed for deep snow and high-speed operation; minimum 15 MPH. Its High Speed-Style moldboard profile helps cast snow much further than other One-way designs.

Trip and Moldboard Options

Trip Options

The One-way High Speed-Style offers the slotted trip option to protect both the plow and the vehicle while meeting different operational needs. The Slotted trip option allows the entire moldboard to slide up in slots to clear the object and compressing the springs, then returning to the plowing position after clearing the obstacle.

Moldboard Options

10GA GR50 Steel
3/16“ GR50 Steel

Moldboard overhang at center attack angle

(A = Moldboard Intake Height | B = Moldboard Discharge Height | C = Moldboard Overhang)

12‘ Models: A 23“ | B 69“ | C -1.4“
10‘ Models: A 26“ | B 54“ | C 23.7“
11‘ Models: A 26“ | B 54“ | C 24.4“
12‘ Models: A 26“ | B 56“ | C 25.3“
12‘ Models: A 35“ | B 63“ | C 25.3“
11‘ Models: A 35“ | B 64“ | C 30.0“
12‘ Models: A 35“ | B 66“ | C 30.8“
11‘ Models: A 36“ | B 62“ | C 25.3“
11‘ Models: A 45“ | B 72“ | C 36.1“
12‘ Models: A 45“ | B 72“ | C 35.5“

Mailbox Trim

The mailbox trim features a cut-out on the right end of the moldboard, ensuring that when the plow is angled toward the trimmed side, the top end of the moldboard does not extend beyond the plow’s clearing path. This design protects mailboxes and other roadside obstacles from being struck while also enhancing visibility when the plow is angled.

Pushframe Options

The One-way plow supports a variety of push frame designs, including the standard reversible frame, the 5“ heavy-duty tube frame, the fixed angle frame, the parallel lift frame, the slotted trip reversible pushframe, and the slotted trip fixed angle pushframe, allowing operators to select the configuration best suited to their vehicle and operational needs.

Pushframe reversible

Lift Options

Multiple lift configurations are available, including chain lift, sling lift, and more options. Allowing operators to choose the system best suited to their vehicle and operational requirements.

Chain Lift

Accessories

Optional accessories provide added functionality and customization to meet diverse operational needs: skid shoes, moldboard shoes, snow wheels, curb guards, nose guards, parking jacks, deflector kits, markers, and lighted markers.